A green stripe on render is algae, growing where rainwater runs down the wall every time it rains. Clean render dries out quickly after a shower. A patch that gets soaked again and again never does, and algae moves in. Nearly always the water is coming from above: a gutter that is overflowing, a joint that leaks, or a downpipe. Where the stripe starts and what shape it is will usually tell you which.
The stripe is the symptom rather than the problem. Stop the water and it stops spreading.
What causes a green stripe on render?
Algae needs light and a surface that stays damp. Most walls only get wet in driving rain and dry out soon after, so nothing gets a hold. Put a steady run of water down the same strip of wall every shower, all year round, and it will. The front of a house can look clean everywhere except one neat green band, which is how you know it is not the weather. Something above it is putting water there.
That also explains why it appears on some houses and not their neighbours. Same street, same render, same weather. The difference is usually a gutter.
What does the shape of the stripe tell you?
Stand back and look at it properly. The shape is the clue.
- A wide band starting right under the gutter. Water is coming over the front edge along a length of the run. The gutter is full, and it needs clearing.
- A narrow stripe that starts at one point. Look straight up from the top of it. If there is a joint between two lengths or a corner piece there, that joint is leaking.
- A line running alongside the downpipe. A joint in the pipe has opened, or the pipe is blocked and backing up so water spills out higher up.
- Green only on the bottom foot or so of the wall. Rain splashing back off the path or gravel, or a downpipe that empties onto the ground instead of into a drain. That one is not the gutter.
- Streaks from the corners of window sills. Water running off the sill ends rather than dripping clear of the wall. Also not a gutter problem.
- The whole wall evenly green. Usually a shaded side of the house that never gets the sun. Nothing is leaking. It is just damp.
If you can, go out in the next heavy shower and watch the top of the stripe. You will often see the water doing it.
Why is water getting behind the gutter?
Sometimes the stripe starts under the gutter but the gutter itself looks clear. Then the water is going down the back of it, not over the front. That happens when the gutter has dropped away from the wall, so rain coming off the tiles misses it, or when the board it is fixed to has gone soft and the brackets have loosened. If yours looks like that, the fix may start with the fascias and soffits rather than the gutter.
Will the green stripe go away once the gutter is fixed?
It stops growing, which is the part that matters. Without a steady supply of water the algae dries out, and over time it dulls and some of it weathers away. But a stripe that has been there for years usually leaves a mark, and getting render properly clean is a separate job. Cleaning render is not on my list of services.
What I would say is this: fix the water first. Clean the render while the gutter is still overflowing and the water that caused the stripe is still running down the same wall, so it grows back. It is money spent on the symptom.
Does a green stripe mean there is damp inside?
Not necessarily. Render is a thick coat, and a wall can be green on the outside and dry on the inside. But a strip of wall that has been soaked every time it rained for years is more likely than most to let damp through, especially around an upstairs window. If you have a damp patch inside that lines up with the stripe outside, stopping the water outside is the obvious first step. What is going on in the wall itself is a question for someone who does damp.
What does it cost to fix?
That depends on which of the causes above it turns out to be. A full gutter needs clearing. A leaking joint needs taking apart and resealing, or a new joining piece. A dropped run needs lifting and re-hanging. A downpipe might need one section replacing. Height and access count too: a joint on a bungalow is quick, the same joint three storeys up over a conservatory is not.
This is one job where a photo really helps before I come out, because the stripe points straight at where the trouble is. I still look before I give you a firm price, and if it is less work than it looked, it costs less.
When to ring someone
If there is a stripe that was not there a year or two ago, or one that is getting longer, something above it is putting water on the wall. For a full gutter, that is gutter clearing, done from the ground. For a joint, a dropped run or a leaking downpipe, it is gutter repairs.
I cover twenty miles around Mexborough, Barnsley and Sheffield included, and there are photos of past jobs on my work page.
Get the whole stripe and the gutter above it in one photo, and WhatsApp it to 07515 154559. Often that is enough to tell which it is. I do not charge for coming out to look.




